Silicone Pressure Sensitive Adhesive

1. 1.Electrical insulating tape
2. 2.Teflon tape
3. 3.Crepe paper tape
4. 4.High-temperatureadhesive tape

INSTRUCTIONS FOR USE

1. XJY 301-5 Silicone Pressure Sensitive Adhesiveis recommended to use the catalyst Bis(2,4-dichlorobenzoyl) peroxide, BPO (benzoyl peroxide), and the catalyst usage amount is 2-3%;
2. The temperature of the solvent volatilization section is kept below 120°C to ensure the lowest control of catalyst decomposition and complete solvent volatilization, otherwise the tape will produce pores and affect the performance of the adhesive;
3. The catalyst preparation concentration is 10%. After preparation, use it as soon as possible, otherwise, the solvent will consume the catalyst and affect the catalytic effect;
4. During curing, the curing temperature can be appropriately increased to ensure that the catalyst is completely decomposed, otherwise, the tape will easily produce white gel-like substances. If BPO is used as the catalyst, the decomposition of the incomplete catalyst will generate a small amount of carbon dioxide gas, forming pores, and affect the performance of the tape.